Chaoshen Technology Trading Mall

Chapter 131

Chapter 131 The Unwilling Bearing Manufacturing Giant

Because this second-generation superconducting battery has solved many problems of the first-generation battery,

So this battery can already be used on a larger caliber electromagnetic rail gun as the energy source of the rail gun.

But even with this kind of battery, it can only provide energy support for a 15mm-caliber railgun, and even a 15mm-caliber railgun can only be fired continuously for about fifty times.

Of course, according to the law of mass-energy, the smaller the caliber of a rail gun, the more shots will naturally be. For example, if it is a rail gun with a caliber of 6 to 7 mm, this superconducting battery can definitely support hundreds of continuous shots.

Then there is the third-generation copper-based superconducting battery technology, which is the final copper-based superconducting battery technology input into his mind in the system. This superconducting battery has a higher energy density in kilograms, up to 100 degrees per kilogram. The degree of electricity.

At the same time, the volume can also be made larger, the largest can even reach the size of one cubic meter.

At the same time, in terms of instantaneous discharge voltage, compared with the second-generation technology, it has made great progress, reaching 5,000. At the same time, like other copper-based superconducting batteries, it can also directly save all of the battery in one second. All of the electricity is released.

Of course, compared to the first and second-generation copper-based superconducting battery technologies, the third-generation technology is also the most difficult, and it is not easy to realize the third-generation technology.

………..

Just when Wang Bin was working hard to realize the superconducting battery technology in his mind in the laboratory.

He didn’t know that at this time, several bearing steel manufacturers that had completely lost their market share in China did not admit failure at all and were preparing to engage in trouble.

Reith

In a conference room at the headquarters of Ruisi Precision Equipment Manufacturing Group, all the senior executives of their group have arrived at this time except for the chairman of the group. Of course, this naturally includes the person in charge of the China market in their group.

“Hey! This time the reshuffle of China’s high-end bearing steel, we Ruisi Precision Equipment, but one of the biggest losers! Except for the Bald Eagle’s ABC and iron female bearings, we are the worst.

We must know that before this, our Ruisi Group had a market share of almost 20% in China’s high-end bearing market! It is one of the largest high-end bearing suppliers in the entire China market, and even many official companies in China will use a large number of our bearings, including military ones, and now our bearings are reduced to second-rate bearings! ”

“Isn’t it! This makes me wonder if I’m dreaming. You must know that the bearings produced by our group are absolutely advanced even if they are placed in the whole world! Now they are almost driven out like this! China market.”

“The truth is hell, it’s all to blame for the Island State Seiko Group and the Empire Precision Instrument Group. If they hadn’t taken the lead in selling high-end bearing steel in China, those high-end bearing manufacturers in China would not have been able to do so in such a short period of time. Obtaining a large amount of real high-end bearing steel, it is impossible for so many high-end bearings to appear in the Chinese market at once, which has caused the high-end bearings we export to China to be completely reduced to second-rate products. You must know that these bearings are even put In the world, there are not many companies or countries that can produce it!”

“Yes, it is them, but the culprit is which Tiangong special materials manufacturing company in China. If it weren’t for their company to sell the world’s top bearing steel at the price of cabbage to those bearing manufacturers in China, Island Seiko and Empire Precision Equipment , It is impossible to sell the world’s truly top bearings and bearings to China, and we naturally cannot be reduced to second-rate bearings.”

“Yes, the Chinese people, if it weren’t for this Tiangong special materials, we wouldn’t have to suffer such a big loss.

You know, we have established several high-end bearing production plants in China! However, as the situation of the bearing market has completely changed, what we have invested in before has been completely washed out. If we are to calculate this, if we are completely driven out of the Chinese market, the loss will not only be the bearing and the bearing steel market. , And those factories that invested in China before! All this must be blamed on that Tiangong Special Materials in China. ”

At this time, the senior executives of the Ruisi Group all pointed their own fingers at Wang Bin and their Tiangong Special Materials Company under the Tiangong Technology. However, they did not want to think about why the island country Jinggong and the Empire Precision Instrument Group were not in this market. In the reshuffle, they lost their original share, and instead increased their market share in China. The deeper reasons for this are actually very clear to them, but they don’t want to admit it.

However, just as the senior management of their group was talking about Tiangong Special Materials Company, the CEO of their company finally walked in from the door of the meeting room, but at this time, the expression of their president was not good, even There was still a lot of anger in his eyes.

In fact, he can’t be blamed. Before the meeting, their group had just held a board of directors. In the board of directors, he was sprayed all morning by the company’s directors. It can be said that in the mouth of the group’s directors, he almost became With the pronoun of incompetent garbage, it can be said that no matter who hears these words, his face will not look good.

Seeing the face of the president of his company, the entire conference room suddenly fell silent. Looking at the faces of their presidents, I knew that if someone turned their heads, it would definitely be the unlucky person for the president to vent his anger.

“The purpose of convening everyone to come to the meeting this time, I think everyone is very clear, it is precisely for China’s bearing market.

During this period of time, China Tiangong Special Materials Co., Ltd. has developed a new type of international top bearing steel, and began to provide a large number of major bearing manufacturers in China at the price of cabbage, which directly led to the shrinking of our orders in the Chinese bearing market. .

In addition to the bearings and bearing steels produced by the two major companies of Island Seiko and Empire Precision Instruments, the large-scale price cuts have made our company’s bearing sales even worse. Even if we later cooperated with Island Seiko and Empire Precision Instruments, the two major companies The same large-scale price reduction measures have been taken, and it has no effect. Our bearings have been reduced to second-rate products in the Chinese market.

Therefore, we must find a way to grab back our original market in China. If you have any good solutions, you can speak freely and let us discuss whether it is feasible. ”

However, after the CEO of their company said these words, 10 minutes later, the whole conference room was quiet, and no one made any comments at all, which made him even more annoyed.

So he furiously said loudly: “What! Are you all dumb? You are all the executives and think tanks of our Ruisi Group. Does this little thing make you think of a solution, you have no way, you are all for free? Is it? The company has spent so much money, what is it for you to come here!”

Just as the president of their company was furious and finished these words, one person in the conference room finally stood up and said softly: “Mr. President, I suggest that our company sells various types of bearings in China, including top-quality bearings. Bearings, including the bearings, can continue to take measures to reduce prices, and they must be lowered to be cheaper than the bearings produced by the two major companies of Island Seiko and Imperial Precision Instruments.

At the same time, in terms of bearing steel, I remember that our company just developed a new type of bearing steel this year. According to the performance of this bearing steel, although it still cannot reach the top level in the world, it is compared with Island Seiko and Imperial Precision Instruments. For these bearing steels sold by the two major companies in China, the performance of these bearing steels exceeds a lot in all aspects.

So I think we can put this bearing steel into China’s bearing steel market, and in terms of price, we can be the same as, or even cheaper than, Island Seiko and Imperial Precision Instruments Group.

Although we sell in China at this price, our profit margin is very small, and we may even lose money, but it can hit other bearing steel and bearing manufacturers and sales companies in the Chinese market.

And this includes the Island Precision Group, the Imperial Precision Instrument Group, and the company in China that has just launched high-end bearing steel.

Although even if we do this, we will not be able to completely defeat the island country precision industry group and the imperial precision instrument group in the China market, but at least the two companies can shrink their market share in China, so that we can grab their market.

According to my investigation, Tiangong Special Material Company was originally a smelting company that produced ordinary special steel.

Therefore, the strength is very limited. At the same time, according to my estimation, the cost of this bearing steel produced by this bearing steel manufacturer in China is not cheap. After all, the performance of this bearing steel is there. The bearing steel sold by this company should have very little profit at the current price.

So as long as we sell this bearing steel in China and sell it at a low price, then I think it will not be difficult to regain market share.

Even if possible, at a certain time, we can directly reduce the price to the same or even lower price as the bearing steel sold by this company. Then, according to the scale of this company, it will not last long. At that time, whether it is acquisition This company still acquires their technology, and it is not up to us to decide.

And as long as this bearing steel enterprise in China falls, the bearing steel and bearing market in China will return to the original situation, and the price of bearing steel will not be determined by us. ”

The CEO looked at the person who stood up and spoke. It was the person in charge of the Chinese market in his company. At the same time, he knew the situation in the China market best. After listening to his words, the president’s face became much better.

“A good way! You can try!” After speaking, he motioned to the head of China’s marketing to sit down first.

Then he spoke again: “Who else has any suggestions?”