togophonebook Chapter 147
Chapter 147
Chapter 147 Successfully developed the production line
In the office, Wang Bin first personally carefully looked at the drawings of these business orders received from the official trading company this time.
He found that the most difficult part of the order was not the parts on the aero-engine, but a spindle that was not known for what it was used for. The length of the spindle reached more than 13 meters, and the maximum diameter was two. Around meters, according to Wang Bin’s judgment, this may be the main shaft used by a large ship.
One end of this spindle is okay, it’s just a thread, but it has a higher precision requirement, but the other end is different. It not only has a lot of gear-like designs, but also has grooves and holes in many places. These holes There are large and small, and even some holes are not straight, but other angles. It is manufactured, and some places need to be hollow, etc. In short, the processing of this spindle is very difficult.
Fortunately, the steel required for this spindle is not a super special steel with very high performance requirements. It only needs ordinary special steel.
This made Wang Bin greatly relieved, but even with ordinary special steel, it is not easy to make such a big guy.
After looking at it for a while, Wang Bin took the drawings to the precision machining workshop, and found Master Zhou, the person in charge of the precision machining workshop, and showed him the drawings.
Master Zhou took the drawing in Wang Bin’s hand, and after looking at it for a while, he said to Wang Bin, “Mr. Wang! Where did you pick up such a big guy, good guy, not only in terms of length, but also far away. Far beyond the processing limit of ordinary large-scale machine tools.
Even in terms of precision, there are very high requirements. I bet, let alone our county, even in the city, no company can produce this big guy, of course except us.
But this big guy, although the processing is very difficult, it can still be processed with our current capabilities of Tiangong Technology, but the processing requires a very long time, and it takes at least half a month to complete. ”
After listening to Master Zhou’s words, Wang Bin breathed a sigh of relief. After all, if he can’t process it, he can only shame his face and go to the city and the official to reject the order. However, if he does this, even though the official won’t tell them. How about engineering technology, but it will definitely leave an unreliable impression, which will definitely have a great impact on their future business of Tiangong Technology.
So Wang Bin said to Master Zhou: “That’s good, then I will give you this task. If you encounter any difficulties, you can find me at any time.
As for the delivery time of this order, the official has no hard and fast rules, but they hope that we can complete it within half a month! ”
After Wang Bin and the others took the order from the city, the entire Tiangong Technology has returned to normal, and various businesses and R&D projects are proceeding in an orderly manner, until almost half a month has passed. At that time, there was a burst of cheers in the mechanical experiment workshop, which disrupted Wang Bin’s experiment once again and made him walk out of the own laboratory again and came to the mechanical experiment workshop.
“Mr. Wang! We have completed the design and production of the special copper alloy production line you want!”
When Wang Bin heard their cheers and came to the mechanical test workshop where they were located, Yu Pingping couldn’t wait to come up and said to Wang Bin happily.
“Very good! Have you tested it? How is the production line running?” Wang Bin also asked Pingping with a smile.
“Mr. Wang, the production line has already undergone a trial run, and the production process is very smooth, without any problems!” Yu Pingping replied.
“That’s good! But don’t be happy too early. You have already carried out a trial run on this production line before, but it was only running on an empty machine, so it is still impossible to really determine the situation of this production line.
I think so! Let’s conduct a trial production of this production line right away, let’s take a look at the situation of the production line! “Wang Bin said.
“Good!” Yu Pingping said.
After speaking, Wang Bin led Yu Pingping out of the experimental workshop and came to the raw material warehouse, instructing the workers to move some raw materials to the experimental workshop, preparing to test the production line.
Soon, with the cooperation of the workers and masters, the raw materials they needed were successfully taken to the experimental workshop, put into the production line, and started the production line.
And the people of Yu Pingping also consciously entered the position of the operator on the production line and opened the production line.
Soon, the first batch of copper-based room temperature superconducting material solution produced on the production line was slowly left out of the solution outlet of the production line under the attention of Wang Bin and others, and entered the already prepared mold. .
Since this was originally only a small production line, and this time it was only a trial production, the copper-based normal temperature superconducting materials produced this time were not many, only half a ton.
Soon, all the solutions in the production line have been poured into the mold.
With the efforts of the workers and masters, these molds were placed in a special coolant that Wang Bin had already prepared for cooling.
Ten minutes later, these molds were salvaged from the special coolant in the eyes of everyone.
When these molds were salvaged and placed on a pallet of goods, Wang Bin immediately stepped forward to check the materials.
When he came to a mold, Wang Bin first naturally looked at the color of these materials. After all, this is also the easiest place to judge. If the color is wrong, it naturally means that the copper-based normal temperature superconducting material produced this time has failed.
To Wang Bin’s sigh of relief, there is nothing wrong with the color of the materials produced this time. It is the same as the one he produced in the laboratory, no difference!
Then Wang Bin opened one of the molds, took out a piece of material from the inside, weighed the weight, and then tapped again. There was nothing wrong with the sound. Wang Bin also let go of it a lot, because according to According to his observation, the copper-based room temperature superconducting material produced this time is likely to have already been made.
Of course, this is only the result of the judgment of others. Whether this production line is really successful in the first trial production depends on the test results of professional instruments.
Therefore, Wang Bin immediately took a piece of material to the own laboratory and began to test this piece of material.
It didn’t take long for Wang Bin to complete the analysis of the material, and got the result, that is, the copper-based normal temperature superconducting materials produced this time, all performance indicators have reached the required data, that is to say, this time The production line developed by Yu Pingping can definitely produce copper-based normal temperature superconducting materials.
So Wang Bin got up, went back to the mechanical research and development experimental workshop, and told Yu Pingping and the others the news.